Fine Cyclo Series Zero Tooth Precision Cycloid Reducer

Power: 0.17kw~14.5kw
Axis arrangement: parallel axis / concentric axis

FC-A, F1C-A, F2C-A
Transmission loss (±3% loading): 1 min
Torque: 111 N.m~5140 N.m
Reduction ratio: 1/29~1/119 
      ●FC-A pure torque output
      ●F1C-A output shaft can withstand radial axial load
 ● F2C-A output shaft can withstand greater radial axial load

FC-T, F2C-T
Transmission loss (±3% loading): 0.5 min
Torque: 167 N.m~4415 N.m
Reduction ratio: 1/81~1/171 
      ●FC-T pure torque output 
      ●F2C-T output shaft can withstand radial axial load

Features:
Low impact
The optimal load balance achieves a stable low impact.

2. Compact structure and low vibration
Three curved plates are used to make the load more dispersed, the structure can be more compact, and the load is optimally balanced, and the excellent stability achieves low vibration.

3. High speed shaft support type
The high-speed shaft is supported by bearings to increase the radial load capacity without adding parts.

4. High rigidity and high efficiency
The number of output drive pins is increased, the load is dispersed, and the rigidity is increased; the rolling contact plus the optimum load balance achieves high efficiency.

5. Long life
At the same time, the continuous curve tooth shape with a large number of teeth is strong, and the main speed reduction mechanism adopts high-carbon high-chromium bearing steel which is resistant to wear and fatigue, achieving long life.

6. Good maintenance performance
The output side flange can be separated from the deceleration section for easy maintenance.

7. Good installation performance
The grease has been sealed and can be loaded into the application machine as it is.