Advanced Search | Search Tips
Gearbox Panasonic Eco-Products Production Line Medical Products
Click the button below to add the FP7 Series to your wish list.
UL/C-UL , CE Approved CE : Excluding AFPRP2□ UL : Excluding some models
August 2017 - Multi-wire Link Unit has been added.
EtherNet/IP compatibility
Models with built-in Ethernet ports add functionality to CPU unit. Easy connection with all kinds of robots and PLCs enables control and communication. * EtherNet/IP is a trademark of ODVA, Inc.
Cassette system reduces unit cost and footproof
With ease and at low cost, extend the serial communication and analog functionality of CPU units.
* Ethernet is a registered trademark of Fuji Xerox Co., Ltd. and Xerox Corporation.
Moreover, when used as a serial communication unit, expansion to as many as 35 channels is possible. Reduces cost and footprint.
To enable information collection, because the FP7 can deal with any protocol for Ethernet / serial communications, the FP7 can be installed in existing facilities.
Communicate easily with many units, including automation control equipment such as PLCs and information equipment such as PCs.
Logging set up is done via the configuration screen. Moreover, it is possible to keep up to 16 files concurrently active. ・Various triggers: periodic, cycle, bit, startup, etc.
Diagnosis of rewrite life of SD memory card helps protect valuable information assets.
Reference value: for 196 k steps type CPU unit (Note)
Note：For data register (DT), data up to 256 k words can be backed up.
Allows the PC to read the logging data in the FP7's SD memory card and to write setting values and other parameters.
Refer to "Applications" >>Applications
The FP7 can generate and write data files to an FTP server on a PC as well as read data files from the FTP server. The sessions use SSL, protecting IDs and passwords.
Transfer data from the FP7 to a web server for easy viewing with a browser. Send and receive data from multiple FP7 units on a schedule controlled by the FP7. Communicate both inside the firewall on an intranet and outside the firewall to the wider world through the Internet.
Allow users from around the world to access the current state of their equipment.
Monitor and control the FP7 without the use of custom software. Users can check the accumulated data in the FP7 with a browser.
Screens (content) that are setup as desired by the user with Control Web Creator are uploaded to the FP7. Then, the information in the FP7's internal Web server can be monitored on a browser.
Control Web Creator This is a graphics creation tool that allows you to easily design Web content that is published by the FP7. You can creatively design content by arranging Web components such as switches, lamps and meters on the screen and then setting the properties. Your content will be linked to information in the PLC without needing any knowledge of HTML. ・Same style of operation as the program display image creation tool ・Components can be arranged by dragging and dropping. ・Detailed component settings are easy using properties. ・Components don't lose quality when enlarged or reduced, and you can color them as desired. ・Images can be pasted in.
This is the Web content that is contained as default in the CPU unit. Status of the FP7 (settings, operation history, errors, etc.) can be checked.
You can view the data register, etc., using a PC or smartphone.
The managers can receive and view e-mailed malfunction notifications and daily reports of equipment operations.
E-mail sending function (SSL-compatible) Use instructions and timings controlled by the FP7 to send e-mails on a pre-set schedule or when a pre-set condition changes in the PLC. The e-mails can have data files attached and communication is SSL-capable to protect the e-mails.
A Single FP7 Motion Control Unit can Control 64 axes of MINAS A5B/A6B and 32 Virtual axes.It is Now Easier to Perform Multiple axial Control.(Dedicated unit for MINAS A5B/A6B series)
*4 axes (2-axis interpolation × 2 groups). Our company created send/receive allocation.
Through use of Web server function on FP7 CPU unit, remote monitoring is possible of things such as torque, speed and position of the motor. Also, with inclusion of peripheral sensor, total operation monitoring is achieved.
Unit equipped with SD memory card. Communications log can be analyzed at startup which makes debugging easy.
Select the functions you need among the many available and achieve a wide range of control with one unit.
・Control possible of connected dedicated boards, custom-built jigs, and all types of sensors.
Can also be used for central control of devices with different voltage and as a converter for 5 V devices.
Capable of direct inspection in inspection lines for 5 V drive electronic components.
Accomplish motor positioning at the best price.
・Complex control achieved in one unit.
With data always at hand, there's no need to go to the work site to check indoor temperature and humidity or the operation of pumps, heaters, and other equipment.
Operational status of the production line can be checked and traceability production control can be carried out. Current production line information can be collected and displayed on Web interface. * QnA compatibility: 3E frame binary, Batch read / write, Master / slave communication
Through a web interface, it is possible to check the status of lighting in buildings and apartments, and to building entries and exits.
Monitor the voltage, current, and storage amount of solar panels and storage batteries. Useful for status updates and preventative maintenance.
Build into your local network with no need for joining a cloud service. Easy to implement centralized information management. * Wi-Fi is a registered trademark of Wi-Fi Alliance. * Ethernet is a registered trademark of Fuji Xerox Co., Ltd. and Xerox Corporation.
Send the results and a notice of completion when a long-term test is completed.
Receive a daily e-mail on your smartphone with the amount of electric power generated.
Manage your records by summarizing measurement data from your sensors together with result information from the inspection machines.
Transfer electric power data from factories and offices to an FTP server on a regular basis.
Users can access the accumulating production information in the server at any time.
Control high-speed counter, positioning and I/O with one unit. Applications are only limited by the terminal allocations possible.
This product hasn't received any reviews yet. Be the first to review this product!
網頁設計 由 Fan Work Shop 提供 Copyright 2025 Ingenuity. Sitemap |
Loading... Please wait...
